2" Hole Punch and Swage Tool

Motamec Hole Punch and Flare / Swage Hand Tool
Size: 2'' ID (50.8mm)
Punches hole and flares in sheet metal / aluminium in one action
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and flared.
Flared hole will have a 45 degree radius angle
Can also be used as regular hole punch by not using the flare forming ring.
Anti-friction thrust bearings included
For sheet metal & alloy plates
Extensively used in the aerospace and motorsport fabrication industries for lightening with increased panel strength and appearance
CNC Manufactured Steel Tool, heat treated for long life
2" is the inside diameter of the hole to be flared
Can also be used in a bench press for repetitive work
Please note: Pilot hole must be drilled first for the draw bolt

Recommended maximum material thickness:
Mild steel: 1.0mm
Stainless steel: 0.7mm
Aluminium: 1.7mm
Damage may occur if used on thicker material

Maximum Bolt Tightening Torque: 244Nm / 180 lbf ft